• imc CRONOSflex

    imc CRONOSflex

    Frameless modular measurement system

Modules

imc CRONOSflex: input modules

As part of the imc CRONOS family, the new imc CRONOSflex continues the tradition for supporting direct measurements of virtually any sensor available for mechanical, electromechanical, and mechatronic measurements. Multi-channel mixed signals, whether analog inputs, counters and incremental encoder inputs, or field bus based signals such as CAN-bus, GM LAN or LIN… you name it: imc CRONOSflex measures it.

Modular measurements
With up to 100kSps per channel, and now supporting up to 2 million samples per second throughput in each base unit, as well as having software configurable high precision signal conditioners and integrated sensor power supplies - the imc CRONOSflex can take on even the toughest data acquisition challenges, while performing at high precision under demanding environmental conditions.

The most striking feature of the imc CRONOSflex system is the imc Click Mechanism - you can add or remove signal-conditioned analog input channels from your imc CRONOSflex system in seconds by simply "clicking" a module on or off the stack. The module's rigid case and automatic recognition by the imc STUDIO software provide the ultimate in flexible modularity. Alternatively, the imc CRONOSflex Modules may be distributed, connected with the base unit or other satellite blocks via standard Ethernet cable.

As with all imc data acquisition system inputs, the imc CRONOSflex Modules integrate signal conditioning, analog filtering, high precision 24-bit digitizers, and digital signal processing. As such, a variety of modules are available from imc—from the general purpose universal 8-channel UNI2-8 module (CRFX/UNI2-8), to more measurement specific modules.

Universal

  UNI2-8 UNI4
Channels 8 4
TEDS Ja Ja
Speed per Channel    
Max Sampling Rate 100 kHz 100 kHz
Max Bandwidth 48 kHz 48 kHz
Voltage Mode    
Isolated   Ja
Voltage up to 10 V Ja Ja
Voltage up to 50 V / 60 V Ja Ja
Isolation up to 800 V    
Voltage up to 1000 V    
Current    
20 mA Internal Shunt Ja Ja
20 mA
Shunt Plug
Ja Ja
Temperaturee    
Thermocouple (TC) Ja Ja
RTD (RTD (PT100)) Ja Ja
Bridge Mode (DMS)    
Full Bridge Ja Ja
Half Bridge Ja Ja
Quarter Bridge Ja Ja
DC Excitation Ja Ja
AC Excitation (CF)    
Audio and Vibration    
IEPE Mode Integrated (ICP-, DeltaTron-, PiezoTron)    
ICP Plug optional optional
Charge    
Charge Mode Integrated    
Miscellaneous    
Sensor Supply Ja Ja
Sensor Supply / Channel   Ja
Module Width  in mm 62 43

Voltage | Current | Temperaturee

  LV3-8 ISO2-8 ISOF-8 HISO-8 HV2-4U HV2-2U2I
Channels 8 8 8 8 4 2+2
TEDS Ja Ja  Ja optional   Ja3
Speed per Channel            
Max Sampling Rate 100 kHz 100 kHz 100 kHz 100 kHz 100 kHz 100 kHz
Max Bandwidth 48 kHz 11 kHz 48 kHz 11 kHz 48 kHz 48 kHz
Voltage Mode            
Isolated   Ja Ja Ja Ja Ja
Voltage up to 10 V Ja Ja Ja Ja Ja Ja
Voltage up to 50 V / 60 V Ja Ja Ja Ja Ja Ja
Isolation up to 800 V       Ja Ja Ja
Voltage up to 1000 V       Ja Ja
Current            
20 mA Internal Shunt       Ja    
20 mA Shunt Plug Ja Ja Ja      
Temperature            
Thermocouple (TC)   Ja Ja Ja    
RTD (PT100)   Ja Ja Ja    
Bridge Mode (DMS)            
Full Bridge            
Half Bridge            
Quarter Bridge            
DC Excitation            
AC Excitation (CF)            
Audio and Vibration            
IEPE Mode Integrated (ICP-, DeltaTron-, PiezoTron)            
ICP Plug optional optional  optional      
Charge            
Charge Mode Integrated            
Miscellaneous            
Sensor Supply optional optional optional    
Sensor Supply / Channel            
Module Width in mm 43 43 43 82 82 82

Strain Gauges

  DCB2-8
DCBC2-8 B-8
BC-8 BR2-4
Channels 8  8 8 8  4
TEDS  Ja    Ja    Ja
Speed per Channel          
Max Sampling Rate 100 kHz 100 kHz 100 kHz 100 kHz 100 kHz
Max Bandwidth 5 kHz 5 kHz 48 kHz 48 kHz 14 kHz
Voltage Mode          
Isolated          
Voltage up to 10 V Ja Ja Ja Ja Ja
Voltage up to 50 V / 60 V          Ja
Isolation up to 800 V          
Voltage up to 1000 V          
Current          
20 mA Internal Shunt Ja Ja Ja Ja  
20 mA Shunt Plug Ja Ja Ja  Ja Ja
Temperature          
Thermocouple (TC)          
RTD (PT100)          
Bridge Mode (DMS)          
Full Bridge Ja Ja Ja Ja Ja
Half Bridge Ja Ja Ja Ja Ja
Quarter Bridge Ja Ja Ja Ja Ja
DC Excitation Ja Ja Ja Ja Ja
AC Excitation (CF)         Ja
Audio and Vibration          
IEPE Mode Integrated (ICP-, DeltaTron-, PiezoTron)          
ICP Plug optional   optional   optional
Charge          
Charge Mode Integrated          
Miscellaneous          
Sensor Supply Ja Ja Ja Ja Ja
Sensor Supply / Channel          
Module Width in mm 62 43 62 43 43

Audio & Vibration

  ICPU2-8 AUDIO2-4 AUDIO2-4-MIC QI-4
Channels 8 4 4 4
TEDS Ja Ja Ja Ja
Speed per Channel        
Max Sampling Rate 100 kHz 100 kHz 100 kHz 100 kHz
Max Bandwidth 48 kHz 48 kHz 48 kHz 48 kHz
Voltage Mode        
Isolated   Ja Ja Ja
Voltage up to 10 V Ja Ja Ja Ja
Voltage up to 50 V / 60 V Ja Ja Ja Ja
Isolation up to 800 V        
Voltage up to 1000 V        
Current        
20 mA Internal Shunt        
20 mA Shunt Plug        
Temperature        
Thermocouple (TC)        
RTD (PT100)        
Bridge Mode (DMS)        
Full Bridge        
Half Bridge        
Quarter Bridge        
DC Excitation        
AC Excitation (CF)        
Audio and Vibration        
IEPE Mode Integrated (ICP-, DeltaTron-, PiezoTron) Ja Ja Ja Ja
ICP Plug        
Charge        
Charge Mode Integrated       Ja
Miscellaneous        
Sensor Supply     Ja  
Sensor Supply / Channel        
Module Width in mm 62 62 62 62

DI | DO | AO

  DI16-DO8-ENC4 DI8-DO8-ENC4-DAC4 HRENC-4 FRQ2-4 DI2-16 DI2-32 DI-16-HV (110V) DO-16-HC DO-32-HC DI2-16-DO-16-HC DO-16-HC-DAC-8 DAC-8
Module type                        
Integrated into the base unit Ja Ja                    
flex-Module     Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja
Digital Inputs/Outputs                        
Input Bits 16 8     16 32 16     16    
High Voltage             Ja          
Output Bits 8 8           16 32 16 16  
High Current               Ja Ja Ja Ja  
Analog Outputs                        
Analog Outputs   4                 8 8
Incremental Encoder                        
Inputs 4 4 4 4                
Quadrature Mode 2 2 4                
Counter Frequency 32 MHz 32 MHz 256 MHz 256 MHz                
Analog sin/cos Mode     Ja                  
Size                        
Width +40 mm + 40 mm 1 1 1 2 1 1 2 2 2 1
Key: Default Optional

UNI2-8 (copy 8)

UNI2-8

 

8-channel, high-performance universal measurement amplifier

The UNI2-8 is a universal measurement amplifier. With 8 differential analog inputs, it is capable of measuring:

  • Voltage and current (20 mA)
  • Temperature (thermocouple and PT100)
  • Bridge and strain gauge (quarter-, half- and full-bridge)
  • IEPE/ICP sensors (via the optional DSUB terminal connector)

For powering external sensors or bridge measurements, a software selectable (2.5 V to 24 V) sensor supply is integrated.

Highlights:

  • An amplifier for all relevant measurement quantities
  • Very high signal bandwidth of up to 48 kHz
  • Finely adjustable input voltage range (±5 mV to ±50 V)
  • Each channel with its own adjustable filter (e.g., anti-aliasing filter) and simultaneous A/D converter
  • Graphical configuration wizard to set strain gauge bridges
  • Software selectable quarter-bridge completion 120 and 350 Ω
  • Supports imc Plug & Measure (Transducer Electronic Data Sheets (IEEE 1451)

Typical applications: Provides maximum flexibility for changing measurement and sensor requirements.


imc CRONOSflex module UNI-4

UNI-4

4-channel, high-performance universal measurement amplifier

The UNI-4 is the most universal measurement amplifier in the portfolio. With 4 differential analog inputs, it is capable of measuring:

  • Voltage and current (isolated measurement)
  • Temperature (thermocouple, isolated measurements)
  • PT100, PT1000
  • Bridge and strain gauge (quarter-, half- and full-bridge)
  • IEPE/ICP sensors (via the optional DSUB terminal connector)

Channel-wise, independently configurable supply voltages (non-isolated) between 0.25 V to 24 V are available for supplying external sensors or bridge measurements.
The channels are individually, galvanically-isolated for voltage, current and thermocouple measurements. Each channel is equipped with its own simultaneous A/D converter and adjustable filter (e.g., anti-aliasing filter).

Highlights:

  • Individual, galvanically-isolated measurement of voltage, current and thermocouples
  • Channel-wise, individually configurable sensor and bridge supply
  • PT100 and PT1000 supported
  • High signal bandwidth of up to 48 kHz
  • Internal quarter-bridge completion of 120, 350 and 1 kΩ
  • Supports imc Plug & Measure (Transducer Electronic Data Sheets (IEEE 1451)

Typical applications: Provides maximum flexibility for changing measurement and sensor requirements, including channel-wise, individual sensor supplies.


    LV3-8

    8-channel differential measurement amplifier

    The LV3-8 is a differential measurement amplifier with 8 channels for measuring:

    • Voltage and current (20 mA)
    • IEPE/ICP sensors (with optional DSUB terminal connector)

    Highlights:

    • Economical, high-resolution measuring of current and voltage
    • Finely adjustable input voltage range (±5 mV to ±50 V)
    • High signal bandwidth up to 48 kHz
    • Each channel with its own adjustable filter (e.g., anti-aliasing filter) and simultaneous A/D converter
    • Supports imc Plug & Measure (Transducer Electronic Data Sheets (IEEE 1451))

    Typical applications: Ideally suited for measurements of signals, voltage-based sensors, as well as 20 mA process variables with higher bandwidths.


    ISO2-8

    [Translate to Australia (en):]

    8-channel, isolated differential measurement amplifier

    The ISO2-8 is an isolated, differential measurement amplifier with 8 galvanically-separated, floating channels for high-precision measuring:

    • Voltage and current (20 mA)
    • Temperature (thermocouples and PT100)
    • ICP sensors (with optional DSUB terminal connector)

    Highlights:

    • Channel-wise isolated, galvanically-separated inputs
    • Finely adjustable input voltage range (±5 mV to ±50 V)
    • High signal bandwidth up to 11 kHz
    • Each channel with its own adjustable filter (e.g., anti-aliasing filter) and simultaneous A/D converter
    • Supports imc Plug & Measure (Transducer Electronic Data Sheets (IEEE 1451))

    Typical applications: Ideally suited for measurements with unclear potential conditions such as in-vehicle or in the railway sector.


    imc CRONOSflex module ISOF-8

    ISOF-8

    8-channel, faster and isolated differential amplifier

    The ISOF-8 is an isolated differential measurement amplifier with 8 galvanically-isolated channels for highly accurate measurements of:

    • Voltage and current (20 mA)
    • Temperature (Thermocouple and PT100)
    • IEPE/ICP sensors (with optional DSUB terminal connector)

    Highlights:

    • Channel-wise isolated, galvanically-separated inputs
    • Finely adjustable input voltage range (from ±50 mV to ±60 V)
    • High signal bandwidth up to 48 kHz
    • Each channel with its own adjustable filter (e.g., anti-aliasing filter) and simultaneous A/D converter
    • Supports imc Plug & Measure (Transducer Electronic Data Sheets (IEEE 1451))

    Typical Applications: Ideally suited for measurements with unclear potential conditions such as in-vehicle or in the railway sector with higher bandwidths.


    HISO-8

    8-channel, isolated HV-differential measurement amplifier

    The HISO-8 is an isolated, differential measurement amplifier with 8 analog inputs for measuring small voltage signals with high common mode isolation up to 800 V for:

    • Voltage (±50 mV to ±60 V)
    • Temperature (thermocouple and PT100)
    • Current (20 mA)

    Highlights:

    • Channel-wise isolated, galvanically-separated inputs
    • High common mode isolation up to 800 V
    • Overvoltage protection ±600 V (differential)
    • High signal bandwidth of up to 11 kHz
    • Each channel with its own adjustable filter (e.g., anti-aliasing filter) and simultaneous A/D converter

    Typical applications: Ideal for measurements on hybrid vehicles, batteries, fuel cells, etc.


    imc CRONOSflex module HV-4U

    HV2-4U

    4-channel module for measurement of high voltages

    With the 4-channel HV2-4U measurement amplifier, high voltages of up to 1000 V can be measured.
    The imc CRONOSflex High Voltage input module (CRFX/HV2-4U) is ideally suited for isolated measurements of high voltage signals up to ±1000 V, as encountered in power quality monitoring and power efficiency analysis of electrical drive systems or hybrid vehicles.

    Highlights:

    • Measurement of voltages of up to 600 VRMS (CAT III) / 1000 VRMS (CAT II)
    • 48 kHz analog bandwidth (-3 dB)
    • Phase accuracy better than 1° for measurements of up to the 50th harmonic of 50/60 Hz line voltage
    • Input ranges from ±1000 V to ±2.5 V, selectable per channel

    Typical applications: Ideal for power measurements, electric motor measurements, batteries, fuel cells, etc.


    HV2-2U2I

    4-Channel module for the measurement of high voltage and current

    With the HV2-2U2I four-channel amplifier, two channels can be used for measuring voltages up to 1000 V, and two channels are available to measure with current probes.

    Highlights:

    • Measurement of voltages of up to 600 VRMS (CAT III) / 1000 VRMS (CAT II)
    • 48 kHz analog bandwidth
    • Analog bandwidth allows for measurements of up to the 50th harmonic
    • Acquisition with current probes or low voltages possible
    • Direct support for use of Rogowski coils
    • Amplitude response for current probes are stored in TEDS and taken into account in the measurement

    Typical Applications: Ideal for power measurements, electric motors measurements, batteries, fuel cells, etc.


    imc CRONOSflex module DCB2-8
    CRFX/DCB2-8

    DCB2-8 & DCBC2-8

    8-channel bridge measurement amplifier for multi-channel strain gauge applications with medium bandwidth

    The DCB(C)2-8 is an economical DC bridge amplifier. With 8 differential analog inputs, it allows the measurement of:

    • Voltage and current (20 mA)
    • Stain gauges, bridge sensors
    • IEPE/ICP sensors (with optional DSUB terminal connector)

    For powering external sensors or bridge measurements, a software selectable sensor supply is integrated.

    Highlights:

    • Medium signal bandwidths of up to 5 kHz
    • Sensor supply with adjustable voltage supply
    • Software selectable quarter-bridge completion between 120 and 350 Ω
    • Graphical configuration wizard to set strain gauge bridges
    • Supports imc Plug & Measure (Transducer Electronic Data Sheets (IEEE 1451))
    • Also available with compact, high-density DSUB terminal connections (variant "C")

    Typical applications: strain gauge measurements, load cells, pressure sensors, universal voltage measurements.


    imc CRONOSflex module B-8
    CRFX/B-8

    B-8 & BC-8

    8-channel bridge measurement  amplifier for multi-channel, dynamic strain gauge applications

    The B(C)-8 is a DC bridge amplifier with 8 differential analog inputs of higher bandwidths allowing the measurement of:

    • Voltage and current (20 mA)
    • Stain gauges, bridge sensors
    • IEPE/ICP sensors (with optional DSUB terminal connector)

    For powering external sensors or bridge measurements, a software selectable sensor supply is integrated.

    Highlights:

    • Very high signal bandwidth of up to 48 kHz
    • Software selectable quarter-bridge completion between 120 and 350 Ω
    • Graphical configuration wizard to set strain gauge bridges
    • Supports imc Plug & Measure (Transducer Electronic Data Sheets (IEEE 1451))
    • Also available with compact, high-density DSUB terminal connections (variant "C")

    Typical applications: strain gauge measurements, load cells, pressure sensors, universal voltage measurements with higher bandwidths.


    imc CRONOSflex module BR2-4
    CRFX/BR2-4

    BR2-4

    4-channel, high-performance bridge measurement amplifier

    The BR2-4 is a universal DC and CF bridge measurement amplifier for 4 channels and can also be used as a DC differential amplifier. It is capable of measuring:

    • 4 strain gauges, with selectable DC or CF (AC) excitation
    • LVDT
    • Voltage and current (20 mA)
    • IEPE/ICP sensors (with optional DSUB terminal connector)

    Highlights:

    • Carrier frequency excitation (5 kHz) for bridges and LVDT
    • Single and dual sense line configurations are supported (e.g., 5/6-wire connection with full-bridge)
    • Symmetric bridge supply of 1 V, 2.5 V, 5 V and with DC, as well as CF (AC) mode
    • Broken wire detection
    • Integrated calibration resistor for shunt calibration
    • Software selectable quarter-bridge completion 120 and 350 Ω
    • Graphical configuration wizard to set strain gauge bridges

    Typical applications: Ideal for bridge measurements in CF mode with elevated requirements for noise suppression and stability, as well as LVDT and inductive displacement sensors.


    imc CRONOSflex module ICPU2-8
    CRFX/ICPU2-8

    ICPU2-8

    8-channel ICP-measurement amplifier

    The ICPU2-8 is a broadband measurement amplifier for the measurement of:

    • IEPE/ICP sensors (current-fed 4 mA)
    • Voltage (AC and DC coupling)

    Direct connection of ICP-compatible sensors (ICP™, DELTATRON®, PIEZOTRON® sensors) takes place via BNC connectors.

    Highlights:

    • High signal bandwidth of up to 48 kHz
    • Finely adjustable input voltage range (from ±5 mV to ±50 V)
    • Input coupling switchable via software: DC, AC, AC with current supply
    • Each channel with its own adjustable filter (e.g., anti-aliasing filter) and simultaneous A/D converter
    • Supports imc Plug & Measure conforming to IEEE 1451.4 (Class I mixed mode interface)

    Typical applications: Ideal for noise and vibration analysis and acceleration measurements.


    imc CRONOSflex module AUDIO2-4
    CRFX/AUDIO2-4

    AUDIO2-4 & AUDIO2-4-MIC

    4-channel audio measurement module

    The AUDIO2-4 measurement module has four individual, galvanically-isolated channels for the acquisition of:

    • IEPE/ICP sensors (current-fed 4 mA)
    • Voltage (AC and DC coupling)

    Direct connection of ICP-compatible sensors (ICP®, Deltatron®, Piezotron® sensors) takes place via BNC connectors.

    Highlights:

    • Per-channel galvanic isolation
    • Robust and feedback-free signal acquisition
    • Signal bandwidth 48 kHz
    • Large signal-to-noise ratio (-110 dB SNR)
    • Low signal distortion (-115 dB THD)
    • High-precision measurements over broad voltage ranges
    • Supports imc Plug & Measure conforming to IEEE 1451.4 (Class I mixed mode interface). Optional supply unit for a condenser microphone available (AUDIO2-4-MIC)

    Typical applications: Ideal for noise measurements, noise and vibration analysis and measuring acceleration.


    QI-4

    The QI-4 is a 4 channel, individually isolated charge amplifier. For each channel, two parallel BNC inputs are provided for charge or ICP and voltage measurements. It is capable for measuring:

    • Quasi-static and dynamic charges
    • Piezoelectric sensors
    • Current-fed IEPE sensors (ICP®, Deltatron®, Piezotron®)
    • Voltage (AC and DC coupling)

    Highlights:

    • Charge measurement with low drift over time, for quasi-static measurements
    • Per-channel galvanic isolation
    • Special, high-isolated, low leakage current charge inputs
    • Signal bandwidth 48 kHz
    • High Signal-to-Noise ratio (-110 dB SNR)
    • Low signal distortion (-115 dB THD)
    • Broken wire detection in measurement mode "AC with current fed"
    • As an alternative to the standard BNC connectors, triaxial connectors are available
    • Supports imc Plug & Measure (Transducer Electronic Data Sheets (IEEE 1451))

    Typical applications: Ideal when using charge sensors in extreme environmental conditions (temperature, radioactivity, pressure, etc.); measurement of forces, pressures, accelerations – e.g., motor indexing on vehicle test benches; detection of vibrations and noises, acoustic emission analysis.


    HRENC-4

    The imc CRONOSflex Module (CRFX/HRENC-4) serves to measure signals whose time- or frequency information is to be captured. In contrast to the case with analog channels, to actual measurement
    does not consist of repeated sampling at a fixed time interval. Instead, digital counters are used to determine either the count of pulses occurring or the time intervals between defined signal slope
    events. For the time measurement/ maximum frequency, a resolution of approx. 3.9 ns (256MHz) is achieved. When using two-track sine/cosine signal encoders, conversion to digital values for determining the rotation direction and the absolute count of increments (full periods) is performed. Additionally, detailed information about the position can be gained by analog evaluation of
    the sine/ cosine signal, which results in yet further increased resolution.

    Highlights

    • The HRENC-4 is both a digital comparator and serves the purposeof analog evaluation (sine / cosine signals).
    • Fully conditioned (differential input and filter)
    • 256MHz measurement time resolution
    • Feedback of revolution speed etc. to precise time measurement

    FRQ2-4

    This amplifier is especially designed for sensors that are able to convert electrical, physical dimensions in frequency. These sensors spent in a "state of rest" (input parameter = 0) a frequency not equal
    zero. The physical dimension combined with the scaling factor has to be entered into the basis card.
    By means of taring in the dialog 'amplifier adjustment' this state of rest is tared as a zero position. Frequencies that are smaller than that state of rest will be notified as negative physical values.


    DIO modules for digital signal and control applications

    This family of modules provides in- and output of digital signals and extend imc CRONOSflex systems with the capability to control measurement environments such as test stands. The digital inputs (DI2-xx) allow sampling of digital signals having TTL/CMOS or 24 V logic levels.

    Highlights DI2-xx

    • Galvanically-isolated 4 Bit groups
    • Configurable for 5 V or 24 V level (of 8 Bit groups)

    The digital outputs (DO-xx-HC) provide isolated control signals with high output current capabilities. The signals' states can be generated by imc Online FAMOS as the result of live calculations or be assigned to states of the trigger machine.

    Highlights DO-xx-HC

    • Galvanically-isolated 8 Bit groups
    • Compatible with 5 V and 24 V Volt output level
    • Configurable driver modes (Open Drain / Open Source / Totem Pole)
    • 0.7 A / Bit drive current (sink and source)

    16-channel modules provide 16 Bit of the same type (DI or DO).

    32-channel modules can be chosen as pure DO or DI type modules or as a combined one (16+16). Those modules are implemented as "Double-modules" acting as two logical modules with their respective IDs displayed on two 7-segment displays.


    16 digital input for high voltage (110 V / 24 V)

    This imc CRONOSflex Module (CRFX/DI-16-HV) is equipped with digital inputs that can sample signals conforming to either 24 V or 110 V logic standards. The connection is realized via 4 terminal blocks of 4 bits each. The logic standard of each group of 8 Bit can be set via a switch.

    Highlights

    • Isolated 4 Bit groups
    • Input level is configurable

    Modules providing control and actuating outputs for control applications

    This family of modules provides output of analog control and actuator signals on 8 channels. The outputs can be defined as the results of live calculations performed by imc Online FAMOS on combinations of measurement channels.

    Highlights DAC

    • ±10 V output voltage levels with max. ±10 mA drive current
    • Ensured startup level 0 V without undefined transient states
    • Short-circuit proof against ground
    • Up to 50 kHz output rate

     

    Besides this DAC module there is a combined "Double-Module" with additional 16 digital outputs (DO-16-HC) available. The digital outputs provide isolated control signals with high output current capabilities. The signals' states can be generated by imc Online FAMOS as the result of live calculations or be assigned to states of the trigger machine.

    Highlights DO-16-HC

    • Galvanically-isolated 8 Bit groups
    • Compatible with 5 V and 24 V Volt output level
    • Configurable driver modes (Open Drain / Open Source / Totem Pole)
    • 0.7 A / Bit drive current (sink and source)

    This "Double-Module" acts as two logical modules with their respective IDs displayed on two 7-segment displays.

    Top